3D-Print Farm

From NURDspace
Revision as of 23:50, 28 August 2024 by Berend (talk | contribs) (Created page with "{{Project |Name=3D-Print Farm |Status=Operational |Niche=3D Printing |Purpose=Reliable fabrication |Picture=3d-Print Farm.jpeg |Tool=Yes |Location=3D-Corner |Category=Fabrication }} Printserver is available at http://10.208.1.19/ or http://http://nurds3d.lan.nurd.space/. We try to keep an array of working printers connected to this server. Current printers: * Ultimaker Original (3mm) * Ultimaker Original + (3mm) * Creality Ender-3 V2 (1.75mm) Limitations: *...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
3D-Print Farm
3d-Print Farm.jpeg
Participants
Skills
Status Operational
Niche 3D Printing
Purpose Reliable fabrication
Tool Yes
Location 3D-Corner
Cost
Tool category Fabrication

3D-Print Farm

3d-Print Farm.jpeg {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::{{{Cost}}} | }}

Printserver is available at http://10.208.1.19/ or http://http://nurds3d.lan.nurd.space/.

We try to keep an array of working printers connected to this server.

Current printers:

  • Ultimaker Original (3mm)
  • Ultimaker Original + (3mm)
  • Creality Ender-3 V2 (1.75mm)

Limitations:

  • Ultimaker Original (+) are prone to heat-creep with the combination of higher temperature filaments, frequent retractions/low-flow conditions.

Upgrade plans:

  • Replace hotend in Ultimaker Original (+) with E3DV6
  • Replace Ultimaker extruders with E3D

We recommend using PrusaSlic3r. Printer profiles to follow ...