Cabletray

From NURDspace
Revision as of 21:48, 8 April 2026 by Peterr (talk | contribs) (planning cabletray)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Planning cable tray continuation, step and two of many

1. Construct the small cable tray going towards the kitchen

  - find the position of the screws in the ceiling beam allong the wall into the kitchen 
    (75cm from main system tray, 150 cm, 75 cm (end of small tray.
  - screw the vertical holders in the beam
  - hang up the small cable tray
  

2. Extend the cable tray in the corridor trough the wall of room 1

 - get a laser to find the position on the wall wthe hole should be 
 - draw the outline on the outside  wall of room 1
 - get a strong enough drill (find Parkside drill back -mail on mailinglist!)
 - drill enough holes allong the outline to be able of remove the inner block
 - rinse and repeat for the inside wall in room 1
 - put up the cable tray