3D-Print Farm

From NURDspace
Revision as of 21:16, 22 April 2026 by Berend (talk | contribs)
Jump to navigation Jump to search
3D-Print Farm
3d-Print Farm.jpeg
Participants
Skills
Status Operational
Niche 3D Printing
Purpose Reliable fabrication
Tool Yes
Location 3D-Corner
Cost
Tool category Fabrication

3D-Print Farm

3d-Print Farm.jpeg {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::{{{Cost}}} | }}



We try to keep an array of working printers connected to this server.

Current working printers:

  • Ultimaker Original modified Direct Drive(1.75mm)


We recommend using PrusaSlic3r to convert STL to gcode, then upload gcode to the appropriate printer on the server and print. Printer profiles to follow ...


FvH says: PrusaSlicer does not seem to support the Ultimaker? For the ultimaker, you can use https://ultimaker.com/software/ultimaker-cura/