RobertLongboard

LongboardMod

Participants	User:buzz
Skills	Mechanics
Status	Planning
Niche
Purpose	Transportation
Tool	No
Location
Cost
Tool category

LongboardMod

Robert-CurrentState2.JPG {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost:: | }}

Parts used

Bought

Printed

Extras

7x WS2812 (4 front , 3 rear)
5V sBEC module (to power the WS2812's)
Arduino Pro Mini (to control the WS2812's)
Arduino Pro Mini (as wired controller)
Potmeter (the actual control)
Switch (to turn on/off the lights)
Doublesided Tape (to mount the WS2812's)
Ducttape (secure the wiring)
Glue (to fix broken prints)

Buildlog

Yay! Just remade my controller, from a wired into a wireless controller \o/

Features;

zarya's 'NrfSensorNode v1' board ( https://nurdspace.nl/NrfSensorNode ), which has;
- ams1117 regulator
- arduino pro mini
- nrf24l01
adafruit powerboost 500
500mah lipo (also from adafruit)

powerswitch (soldered into the battery, ha)
potmeter (some random one i found)
housing (charger of some thing, no clue, it fit my hand :D )

--buZz (talk) 23:00, 13 June 2015 (CEST)

Woot! 17 hours printing gave me this as new battery case :D

--buZz (talk) 00:15, 8 June 2015 (CEST)

Just to note, things i still need/want;

--buZz (talk) 03:09, 28 May 2015 (CEST)

Tried to make a 3S cell, its currently charging. Not sure how well this is going to feed the many amps required ;)

--buZz (talk) 00:05, 27 May 2015 (CEST)

Added lights \o/ Yay NURDLed

--buZz (talk) 02:55, 21 May 2015 (CEST)

Some maff for max speed;

(((22.2*280)/(44/16)*(90*3.1415))/1000/1000)*60=38.34503476363636363620

22.2 = nominal voltage 
280 = 280kv motor
44 = wheel pulley
16 = motor pulley
90 = wheel diameter in mm

--buZz (talk) 12:23, 18 May 2015 (CEST)

Published some models;

http://www.thingiverse.com/thing:833057 (wheel pulleys, both 44 and 48 teeth versions)
http://www.thingiverse.com/thing:833053 (motor pulley, 16 teeth version)
http://www.thingiverse.com/thing:804463 (updated motor mount)

--buZz (talk) 23:55, 17 May 2015 (CEST)

Some videos of me in movement!!

--buZz (talk) 20:14, 17 May 2015 (CEST)

Made the mount smaller and firmer.

--buZz (talk) 14:24, 17 May 2015 (CEST)

Been trying out a mount and pulleys and the belt. Results thusfar;

This looks very promising!

--buZz (talk) 13:33, 16 May 2015 (CEST)

Belts arrived \o/

--buZz (talk) 18:38, 11 May 2015 (CEST)

Ordered ESC and programming card.

Should arrive in a couple of days.

--buZz (talk) 13:12, 10 May 2015 (CEST)

Used http://www.bbman.com/catalog/belt-length-calculator.html to calculate the center distances. Got to these results thusfar;

12/40 with 270mm gets 66.3
16/40 with 270mm gets 62.1
16/44 with 270mm gets 55.6

12/40 with 295mm gets 79.4
12/44 with 295mm gets 73.1
15/40 with 295mm gets 76.2
15/44 with 295mm gets 70.0
16/44 with 295mm gets 68.9

--buZz (talk) 01:41, 4 May 2015 (CEST)

Ordered belts \o/ 270 and 295mm in size , 15mm wide, from beltingonline.com, should be here in a week :)

--buZz (talk) 02:10, 3 May 2015 (CEST)

Worked on motormount attempt today, released results already on http://www.thingiverse.com/thing:804463

--buZz (talk) 01:18, 2 May 2015 (CEST)

M5x70 DIN912 12.9

--buZz (talk) 18:15, 30 April 2015 (CEST)

Gotta go mess around with;

--buZz (talk) 16:45, 29 April 2015 (CEST)

Ok, sad, don't see anything on i2c :/ Maybe I should have tested this nunchuk a bit more...

--buZz (talk) 04:21, 26 April 2015 (CEST)

Modding the wii nunchuk receiver onto a 'arduino pro mini' board with a 3.3V regulator combined.

Also adding a i2c breakout (for future addition?) and ~something for WS2812 output.

--buZz (talk) 22:49, 25 April 2015 (CEST)

So, i've started a buildlog here to keep track of order etc.

Mounted the pulley today, and, as i suspected i need longer M5 bolts. About 70mm should do. So, need to grab some of those soon.

Looks and feels proper enough, so will be ordering a HTD belt soon. Need to find a 280/290 5M 15MM HTD belt, any leads? :)

Also, remember to grab this for front pulley; http://www.thingiverse.com/thing:16627

--buZz (talk) 23:28, 17 April 2015 (CEST)

Just some links

http://diyelectricskateboard.com/

http://www.beltingonline.com/

Calc center distance of pulleys:

https://sdp-si.com/estore_cd

Came to about 5.5 to 7.5cm distance, will need to redo when i know actual belt size etc

Printable???

Let's try this :)

Blurb

~going to use:

HTD 5mm belt
15/44 pulleys
- http://diyelectricskateboard.com/product/44t-drive-wheel-pulley/
- http://www.evolveskateboards.de/index.php/en/shop-buy-online/compatible-longboard-wheels/evolve-drive-gear-abec11-detail
90mm
- http://www.sickboards.nl/en/wheels/1665-bigfoot-wheels-90-mm.html?search_query=90mm&results=2
>60A esc (hooked to arduino)
5055 280kv motor
- http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18175
6S battery config (probably in 3/4Ah packages)
wireless nunchuck (hooked to arduino)
some kind of lights (hooked to arduino)
- NURDLed

http://endless-sphere.com/forums/viewtopic.php?f=35&t=67555

The Victim