| PiRistona SA5026A | |
|---|---|
 | |
| Participants | Dennis |
| Skills | Linux |
| Status | Active |
| Niche | Music |
| Purpose | |
| Tool | No |
| Location | Niz |
| Cost | |
| Tool category | |
AristonaSA5026A.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
What
I've acquired a beautiful antique Aristona SA5026A. Plan is to make a nice music player out of it using a Raspberry Pi B+ and a Suptronics X400 AMP/DAC HAT.
Software
WiP
Rune Audio
Tried v0.3-beta (29/10/2014), could not get it stable. It consistently threw kernel panics when rebooting, and the WebUI kept crashing.
Volumio
Tried volumio-2.246-2017-07-31-pi.img. After first boot you should wait while a lot of stuff is happening, like partition resizing. If you reboot it to soon you'll end up with a non working system. Got DAC working from within the WebUI:
- Go to Menu
- Choose Playback Opions
- Enable I2S DAC
- Choose IQaudIO Pi-DigiAMP+
- Save and reboot
OSMC
Got DAC working, needed two lines in /boot/config.txt:
dtparam=i2s=on dtoverlay=iqaudio-dacplus
After a reboot I could select this as default audio output in OSMC \o.