FH-1 MIDI controller: Difference between revisions

From NURDspace
Line 17: Line 17:


== Software ==
== Software ==
=== 16U2 firmware ===
=== dualMocoLUFA 16U2 firmware ===
The USB to serial chip on this Funduino board is actually a ATmega16U2 microcontroller. It is possible to reprogram this to act as a USB MIDI -> serial bridge. Details about which firmware I used will follow. I soldered on a toggle switch to switch between MIDI mode and normal mode (to upload new sketches).
The USB to serial chip on this Funduino board is actually a ATmega16U2 microcontroller. It is possible to reprogram this to act as a USB MIDI -> serial bridge. I used [http://morecatlab.akiba.coocan.jp/lab/index.php/aruino/midi-firmware-for-arduino-uno-moco/?lang=en dualMocoLUFA] and soldered on a toggle switch to switch between MIDI mode and normal mode (to upload new sketches).


=== Arduino sketch ===
=== Arduino sketch ===
In progress...
In progress...

Revision as of 12:09, 14 February 2022

FH-1 MIDI controller
FH-1 MIDI controller.jpg
Participants Dennis
Skills Arduino
Status In progress
Niche Music
Purpose Instrument
Tool No
Location
Cost
Tool category

FH-1 MIDI controller

FH-1_MIDI_controller.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

What

Trying to build an Arduino MIDI controller for controlling the Expert Sleepers FH-1 Eurorack module.

Hardware

  • Funduino Arduino Uno R3 clone
  • Joystick Shield (marked as V1.A)
  • Breakout board with SSD1306 I2C OLED screen (address 0x3C)
  • Toggle switch

Software

dualMocoLUFA 16U2 firmware

The USB to serial chip on this Funduino board is actually a ATmega16U2 microcontroller. It is possible to reprogram this to act as a USB MIDI -> serial bridge. I used dualMocoLUFA and soldered on a toggle switch to switch between MIDI mode and normal mode (to upload new sketches).

Arduino sketch

In progress...