Printer manual V2: Difference between revisions

From NURDspace
(Created page with "{{Project |Name=Printer manual V2 |Skills=3D Printing, |Status=Active |Purpose=Education |Tool=Yes |Location=Printer corner and/or @ home |Cost=your filament }} HOW TO OPERATE...")
 
m (turn numbered list in to actual numbered list)
Line 10: Line 10:
HOW TO OPERATE THE ANET A8 FROM THE SPACE
HOW TO OPERATE THE ANET A8 FROM THE SPACE


1 download latest cura version (if you haven´t)
download latest cura version (if you haven´t)
2 import printer profile (located on the sd card in the printer)
import printer profile (located on the sd card in the printer)
3 slice the print and save on the sd card
slice the print and save on the sd card
4 start preheat pla in the menu from the printer
start preheat pla in the menu from the printer
5 when the printer is heated make sure there is filament loaded in the printer
when the printer is heated make sure there is filament loaded in the printer
6 insert sd card
insert sd card
7 initialise sd card  
initialise sd card  
8 choose print from sd
choose print from sd
9 choose your print
choose your print
10 hope that you dont burn down the building
hope that you dont burn down the building

Revision as of 15:37, 12 December 2018

Printer manual V2
NoPicture.png
Participants
Skills 3D Printing
Status Active
Niche
Purpose Education
Tool Yes
Location Printer corner and/or @ home
Cost your filament
Tool category

Printer manual V2 Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::your filament | }}

HOW TO OPERATE THE ANET A8 FROM THE SPACE

  1. download latest cura version (if you haven´t)
  2. import printer profile (located on the sd card in the printer)
  3. slice the print and save on the sd card
  4. start preheat pla in the menu from the printer
  5. when the printer is heated make sure there is filament loaded in the printer
  6. insert sd card
  7. initialise sd card
  8. choose print from sd
  9. choose your print
  10. hope that you dont burn down the building