Midi Touch v2

From NURDspace
Midi Touch v2
Participants User:buzz
Skills Coding, 3D Printing, Electronics, Experimentation
Status Active
Niche Electronics
Purpose Fun
Tool No
Tool category

Midi Touch v2

Miditouchv2-beta.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}


Preliminary github repo; https://github.com/buzztiaan/mt2

Currently contains the case design.

--buZz (talk) 23:23, 17 November 2013 (CET)

Playing around in openscad to get some case for further development :)

--buZz (talk) 05:09, 17 November 2013 (CET)

Moar linkdumps

--buZz (talk) 01:33, 8 November 2013 (CET)



--buZz (talk) 14:25, 16 October 2013 (CEST)

So, spent yesterday fixing up my Stellaris toolchain and starting to write some code for it. I now have Xbee and Rotary Encoder working on the Stellaris end.

Today I've been breaking my head over PS/2 protocol, and as a distraction soldered up a little shield for the Stellaris :D

Miditouchv2-Shield.jpg Miditouchv2-Shield-with-stellaris.jpg

--buZz (talk) 22:32, 6 April 2013 (CEST)


Just a sketch and mockup of the 'instrument' idea;

Sketch1 miditouch v2.png Mockup1 miditouch v2.png

From left to right, touchpad, rotary encoder, led matrix


Earlier I had made a touchpad-midicontroller of sorts, see;

Miditouch v1.jpg

This project is the reinvention/redo/rewind of that project.

Collected Links


  • found a Teensy 2.0, so might make the 'pc side' real, proper, hardware USBmidi with this...

  • ps2 touchpad for data input
  • led matrix for data output
  • rotary encoder(?) for extra datainput / mode switching

  • wristframe? or instrument ...