Envisiontec Ultra 3DP SLA printer: Difference between revisions

Revision as of 21:04, 13 May 2020

Envisiontec Ultra 3DP SLA printer

Participants
Skills	3D Printing, Windows and things
Status	Getting parts
Niche	Hardware
Purpose	Electronics, fun, world domination
Tool	Yes
Location	In the middle of the space
Cost	lets say affordable
Tool category	Fabrication

Envisiontec_Ultra_3DP.jpg {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::lets say affordable | }}

So we acquired an 3d printer thanks to profzon

The Specs are: LxBxH Alot It uses resin it has a freaking bright projector

It used to have Crypt0l0cker ransomware on it (NOT OUR FAULT)

There are installation cds and manuals located in the lower cabinet of the printer. (but not the installation keys)

BuZz and Melan have given another look at the printer and have discovered the following things

We do indeed have a license code for Magics EnvisionTec Ultra (Which now seems to be attached to Melan's laptop)
Magics EnvisionTec Ultra seems to be the 3D modeling software that can be used to add structures before printing
PREFactory is the slicer, and used to generate jobs
We likely do have all the drivers
We are missing the software Ultra Control which unfortunately is only program that got hit by the crypto-locker
An E-mail has been sent to some Company to sample if they can decrypt the Ultra Control files

~~Fix the leakage.~~ Turned out not to be a leak, just a tipped over bottle inside.
~~Reinstall OS~~ Done \o/
Find the missing drivers on the backup or elsewhere (50% done backup settings are on the desktop but software needs to be installed)
Get all the software working again
????
Print \o/

We made a backup of the whole drive for in case we screw it up more ( at /mnt/mp3/backups )
NoxiousPluK reinstalled Windows XP Pro SP3 + all pc drivers (missing are touchscreen, camera and cardreader driver)
Placed a backup folder on the desktop with the settings for printer software, still need to install printer software.

Imaged the install CDs finally! http://space.nurdspace.nl/~melan/printer/
Realized that the CCKey was already on one of the materials. This is used for the 'Magics' software, which seems to be mostly ment for STL repair and support generation.

@@ Line 55: / Line 55: @@
 * https://envisiontec.com/3d-printers/industrial-3d-printers/ultra-3sp/
 * http://robotsinthesun.org/monkeyprint-an-open-source-3d-print-software/ an open-source slicer need to look into that
+* X motor board https://www.gmp.ch/htmlarea/pdf_galil/cat14x5_34x5.pdf
 == Pics of the inside ==