Jarvis: Difference between revisions

Revision as of 13:40, 19 March 2022

Jarvis

Participants	Dennis
Skills	Electronics, IoT
Status	Production
Niche
Purpose	Infra
Tool	No
Location	Coherence
Cost
Tool category

Jarvis Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Jarvis is the VM running Home Assistant (HASS ) on Coherence and is able to automate tasks in the space

Web interface

http://10.208.11.32/ in case this does not work http://10.208.11.32:8123/
user: nurds
pass: same as wifi ask in the space

Known issues

Firefox
- required key not provided @ data['redirect_url'] : https://github.com/home-assistant/home-assistant-polymer/issues/2828#issuecomment-467589688

VM access

If you want access to the VM itself, for instance with SSH, use following creds:

User: nurds
Pass: the long one :)

Starting HASS

It starts automatically within docker

iptables port forward: iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8123

Current Automations

Stop music on mpd when the space is closed
Start music on mpd when the space opens.
Power down EPC/APC and Sonoff when space is closed.
Power up Sonoff when space is open.

Custom stuff

OpenTherm Gateway

OpenTherm gateway has been put between the heater and the thermostat, see OpenTherm_Gateway

EPC (PDU)

https://gist.github.com/zarya/52b603146faac2b3d42e417532975054

- platform: command_line
  switches:
    epc2_1:
      command_on: "/config/epc.py <IP> 1 1"
      command_off: "/config/epc.py <IP> 1 0"
      command_state: "/config/epc.py <IP> 1"
      value_template: '{{ value == "ON" }}'

http://wiki.gude.info/FAQ_EPC_CmdLine

APC (PDU)

Off snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2 
On snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1
get snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1
output 1 == on 2 == off
get input amps (x10) snmpget -v1 -OvqU -c NURDsnmp 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1

Sensor (Amps)

- platform: snmp
  name: 'pdu1_input_amps'
  host: <IP>
  community: "this"
  baseoid: .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1
  version: "1"
  accept_errors: true
  unit_of_measurement: 'A'
  value_template: '{{ value | float / 10 }}'

Switch

- platform: snmp
  name: pdu1_1
  host: <IP>
  baseoid: .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1
  community: "this"
  payload_on: 1
  payload_off: 2
  version: "1"
- platform: snmp
  name: pdu1_1
  host: <IP>
  baseoid: .1.3.6.1.4.1.318.1.1.4.4.2.1.3.2
  community: "this"
  payload_on: 1
  payload_off: 2
  version: "1"

Notifications

LEDtickers

You can use services notify.ledticker_zaal1, notify.ledticker_bar and notify.ledticker_rookhok to send stuff to individual LEDtickers, or notify.all_ledtickers to send to all. The custom component for this can be found in /usr/share/hassio/homeassistant/custom_components/ledticker. New LEDtickers can be set up in /usr/share/hassio/homeassistant/configuration.yaml.

Todo:

Possibility to use host names instead of IPs

NURDbot

Spams stuff using service notify.nurdbot @ Nurdbot using /usr/share/hassio/homeassistant/jsb/jsb-udpsend.

Device tracker

We get MAC addresses that are connected to the Wifi from the Aruba AP. We do not track devices by default.

Why would you want to be tracked?

We can do reporting of tracked devices and whether they are 'home' or 'not_home'. One example that we have is !who on Nurdbot. We might also do personalized automations at some point.

Enable tracking for your MAC address

If you want your device to be tracked, you need to search for your MAC address in /usr/share/hassio/homeassistant/known_devices.yaml and:

You can access a terminal through the Jarvis web interface, choose 'Terminal' in the left hand menu
Set track to true
Set name to something recognizable
Restart hass
Configure a person in http://jarvis:8123/config/person with the tracked device(s)

Changelog

Added the EPC PDU's to HASS
Added the space state
Added power usage
Added Axis camera
Added grote zaal rechts (TL)
Added Webcam connected to SlabPi
Moved to hass.io
Moved SonOff Basic to ESPHome and MQTT discovery
Added octoprint
Enabled device tracking through Aruba AP

Installation

We want to be able to easily update home assistant. One way to achieve this is to use Hass.io which in turn uses docker. On our proxmox environment it is not easy to run docker in a proxmox container, so we set up a proper VM for this.

Docker installation

Home assistant config location: /usr/share/hassio/homeassistant# Enabled docker repo and installed it (https://docs.docker.com/install/linux/docker-ce/ubuntu/). User nurds is in the docker group so it can do docker things without sudo.

Installed HASS.IO x86 https://www.home-assistant.io/blog/2017/11/29/hassio-virtual-machine/ Using the install script https://raw.githubusercontent.com/home-assistant/hassio-build/master/install/hassio_install

Logging MQTT addon turned off

Because mosquitto was filling the disks with logs a .conf file was put in /usr/share/hassio/share/mosquitto with following contents:

log_dest none

After a restart of the addon, logging only shows startup until the added config file is read.

To Do

Radiator automation integration.

@@ Line 112: / Line 112: @@
 === Enable tracking for your MAC address ===
 If you want your device to be tracked, you need to search for your MAC address in ''/usr/share/hassio/homeassistant/known_devices.yaml'' and:
+* You can access a terminal through the Jarvis web interface, choose 'Terminal' in the left hand menu
 * Set ''track'' to ''true''
 * Set ''name'' to something recognizable