Door lock

Door lock
Participants
Skills	Electronics
Status	Active
Niche	Electronics
Purpose	Infra
Tool	No
Location	Front Door
Cost
Tool category	Electronics

Door lock Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Introduction

This page describes the hardware used to create the new door lock of the space. Basically there is a RFID-reader that can read blue keychain tokens and some types of RFID-cards (like OV-chipkaart and WUR-cards). The code of the token/card needs to be read once to match it to a user and then grants access to the front door. Zarya can do this for you when needed.

Hardware used

• http://www.abloy.gr/files/electromechanical_locks_EL420.pdf
• https://www.paxton-access.com/products.asp?strStage=net2&id=011,24

Pics

• 
• 
• 
• 
• 

Doordaemon script

• doordaemon
  • responds to offering a RFID tag (mifare and others) at the doorsensor

Now running in a docker container on docker.vm.nurd.space

Seeing the logs: docker logs -f doordeamon

Restarting: docker restart doordeamon

** runs on the nurdbot VM

• • • reads an imap box
    • sends metrics to mqtt
    • Installed under /home/nurdbot/doordaemon
    • configured via /home/nurdbot/doordaemon/config.json
    • Management via /etc/init.d/doordaemon
    • Logging in /var/log/doordaemon.log

Restarting:

/etc/init.d/doordaemon restart

Next generation

Requirements

• Must be contained in a single device
• Must have a power backup (UPS) at least 12 hours of runtime
• Must provide support for the current cards to be able to migrate to new cards/tokens
  • 125kc is support but requires extra hardware
• New tokens should be of a secure type and not use the card id as credential

Nice to have

• Tokens on mobile

Hardware

• Must support wiegand

Software

https://gitea.vm.nurd.space/zarya/door-controller

old software

• Write our own?
  • https://github.com/ArPIHomeSecurity/pywiegand
• https://github.com/leosac Not to usefull, hard to compile, hard to modify (c++)
  • https://github.com/leosac/leosac
  • https://github.com/leosac/leosac-web

Reader and WEMOS have been ordered, will make a test setup with this software: https://github.com/esprfid/esp-rfid when it's all in the reader supports MiFare and 125khz tags.

Running

• Wemos D1 reachable via d00rl0ck.local (Needs update due to MQTT BROKER ISSUES)

Pin out of reader to CAT5

12v+ RED > ORANGE | 12-(Ground) BLACK > BROWN/WHITE | D0/RX/4AR+(wiegand) GREEN > GREEN | D1/TX/4AR- WHITE > GREEN/WHITE | LED BLUE > BLUE| BEEP YELLOW > BROWN | WG26/34 GRAY > BLUE>WHITE | Door Bell > PURPLE > ? | ORANGE/WHITE isn't used

ToDo

• Upgrade ESP-RFID to 1.3.3 HOTFIX [1]
• Test out the scanner
• Hack that SBOARD?
• Maybe rewrite ESP-RFID to python to run on space nanny