Configuration of a brocade poe switch

howto config a brocade switch
Participants
Skills	Programming, coding
Status	Active as fuck
Niche	Documentation
Purpose	Infra
Tool	No
Location	Space
Cost	0
Tool category	Infra

howto config a brocade switch Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::0 | }}

If you don't know the root password take the next steps:

1. connect a serial cable to er serial port from the switch & pc, open a serial communication program with next, settings: 9600 8n1 and none flow control.
2. on power up pres the b button.
3. Enter on the prompt no password you cant abbr.
4. Enter on the prompt "'boot system flash primary'".
5. Enter on the prompt enable
6. Enter on the prompt configure terminal
7. Enter on the prompt enable super-user-pasword password
8. Enter on the prompt enable port-config-pasword password
9. Enter on the prompt enable read-only-pasword password
10. write memory # to save the settings

0/1/portnr. Config ports all lacp:

1. edge port nr: 39 40
2. Synology :41,42
3. erratic: 43,44

switch 1 a fours four ports trunk: 45,46,47,48 Howto config:

trunk ethernet 0/1/45 to 0/1/44
trunk ethernet 0/1/43 to 0/1/44 
trunk ethernet 0/1/41 to 0/1/42 
trunk ethernet 0/1/39 to 0/1/40 
write memory
trunk deploy.

1. you can name the ports alone 1 port of a trunk with next command:

interface ethernet 0/1/45 port-name switch1 interface ethernet 0/1/43 port-name synolgic interface ethernet 0/1/41 port-name erratic interface ethernet 0/1/39 port-name edge interface ethernet 0/1/1 port-name config write memory BR-Serverrack(config-vlan-1)#webauth BR-Serverrack(config-vlan-1-webauth)#enable BR-Serverrack(config-vlan-1-webauth)#exit BR-Serverrack(config-vlan-1)#loca BR-Serverrack(config-vlan-1)#local BR-Serverrack(config-vlan-1)#local- BR-Serverrack(config-vlan-1)#exit BR-Serverrack(config)#loca

 local-userdb                  Configure local user database

BR-Serverrack(config)#local-userdb

 ASCII string   <Local user database name (Max 31 characters)>

BR-Serverrack(config)#local-userdb admindb

Using this switch

Start situatie

Core-sw

43 harmony lacp
44 harmony lacp
45 erratic lacp
46 erratic lacp
47 gateway lacp
48 gateway lacp

#1 rack switch activeren

• Internet kabel naar rack

core-sw

46 rack-sw lacp1 -> rack-sw 46
48 rack-sw lacp1 -> rack-sw 48

rack-sw

46 core-sw lacp1 -> core-sw 46
48 core-sw lacp1 -> core-sw 48

#2 gateway om

rack-sw

43 gateway lacp2
44 gateway lacp2
48 core-sw lacp1 -> core-sw 48

core-sw

48 core-sw lacp1 -> rack-sw 48

#3 erratic + harmony om

rack-sw

39 harmony lacp4
40 harmony lacp4
41 erratic lacp3
42 erratic lacp3
46 core-sw lacp1 -> core-sw 46

core-sw

46 rack-sw lacp1 -> rack-sw 46

Switch configuraties

core-sw

43 vrij
44 vrij
45 rack-sw lacp1
46 rack-sw lacp1
47 rack-sw lacp1
48 rack-sw lacp1

rack-sw

39 harmony lacp4
40 harmony lacp4
41 erratic lacp3
42 erratic lacp3
43 gateway lacp2
44 gateway lacp2
45 core-sw lacp1
46 core-sw lacp1
47 core-sw lacp1
48 core-sw lacp1