No edit summary |
No edit summary |
||
Line 97: | Line 97: | ||
== Switch == | == Switch == | ||
* HP 1910-24G JE006A | * HP 1910-24G JE006A | ||
== Current Status == | |||
Most of the scripting has been copied over from [9 Screen Wall 1] and is semi-working. In order to complete things properly, the internal networking needs finishing. | |||
* Internal IP range: VLAN1, 192.168.0/24, set untagged on #2-#8, tagged on #1 | |||
* External VLAN: 2, set untagged on the external port and #1 | |||
* The switch is set up on 192.168.0.254 | |||
The current idea is to set up DHCP on #1 on interface eth0.1, set MASQ up between the two interfaces, and allow DNS forwarding over that. |
Revision as of 22:20, 6 March 2016
16 Screen Wall | |
---|---|
Participants | Nooitaf, User:zmatt |
Skills | Linux, X |
Status | Active |
Niche | Video artsy stuff |
Purpose | Fun |
Tool | No |
Location | Space |
Cost | |
Tool category |
16screen-thingy.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
Since 9 screens are obviously not enough (see 9 Screen Wall 1), Petraea built a 16 screen one.
Machines
Machine 1
- HP Compaq dc7600 Ultra-slim
- Pentium 4 3GHz
- 2.25GB DDR2 533MHz RAM (2x 1 GB and 1x 256MB), max 3x1GB
Machine 2
- HP Compaq dc7600 Ultra-slim
- Pentium 4 3Ghz
- 1GB DDR2 533MHz (1x512MB and 2x256MB) Max 3x1GB
Machine 3
- HP Compaq dc7700p Convertible Minitower
- Core2 6300 @ 1.86GHz
- 1GB DDR2 533MHz (2x512MB) (max 4x2GB)
Machine 4
- Asus 5S800-VM/Vintage
- Celeron D 2.66GHz running @ 2.8GHz
- 2GB DDR (2x 1GB, no slots free)
Machine 5
- HP Compaq dc7600 Ultra-slim
- Pentium 4 3GHz
- 2GB DDR2 533MHz (2x 1GB) max 3x 1GB
Machine 6
- HP Compaq dc7600 Ultra-slim
- Pentium 4 3GHz
- 1GB DDR2 (2x512MB, one slot free, max 3GB)
Machine 7
- HP d330 uT (DG285T)
- Pentium 4 2.6GHz
- 2GB (4x512MB, no slots free)
Machine 8
- Dell Optiplex GX270
- Pentium 4 * 2.8GHz
- 2GB DDR RAM (4x512MB, no slots free)
Switch
- HP 1910-24G JE006A
Current Status
Most of the scripting has been copied over from [9 Screen Wall 1] and is semi-working. In order to complete things properly, the internal networking needs finishing.
- Internal IP range: VLAN1, 192.168.0/24, set untagged on #2-#8, tagged on #1
- External VLAN: 2, set untagged on the external port and #1
- The switch is set up on 192.168.0.254
The current idea is to set up DHCP on #1 on interface eth0.1, set MASQ up between the two interfaces, and allow DNS forwarding over that.