Jarvis

Jarvis
Participants	Dennis
Skills	Electronics, IoT
Status	Production
Niche
Purpose	Infra
Tool	No
Location
Cost
Tool category

Jarvis Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Jarvis is the VM running Home Assistant (HASS) and is able to automate tasks in the space See http://10.208.11.32/ or http://10.208.11.32:8123 when port 80 is not working. Port 80 should work because of a port forward started from /etc/rc.local.

Starting HASS

/etc/init.d/homeassistant install
/etc/init.d/homeassistant start

It should do this on boot through /etc/rc.local.

Changelog

• Added the EPC PDU's to HASS
• Added the space state
• Added power usage
• Added Axis camera
• Added grote zaal rechts (TL)
• Added Webcam connected to SlabPi

Current Automations

• Stop music on mpd when the space is closed
• Start music on mpd when the space opens.
• Power down EPC/APC and Sonoff when space is closed.
• Power up Sonoff when space is open.

Custom stuff

Fluxo

Runs stuff for power meter, see Fluxo.

EPC (PDU)

http://wiki.gude.info/FAQ_EPC_CmdLine

 root@jarvis:/home/homeassistant/.homeassistant# cat switches.yaml 
 - platform: command_line
  switches:
    epc2_1:
      command_on: "/usr/bin/curl http://<IP>/SWOV.CGI?s1=1"
      command_off: "/usr/bin/curl http://<IP>/SWOV.CGI?s1=0"
      command_state: "/opt/epc/epccontrol2.pl --host=<IP> | grep 1"
      value_template: '{{ value == "1 is ON" }}'
      friendly_name: epc2 1

APC (PDU)

Off snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2 
On snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1
get snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1
output 1 == on 2 == off
get input amps (x10) snmpget -v1 -OvqU -c NURDsnmp 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1

Sensor (Amps)

- platform: command_line
  name: pdu1_input_amps 
  command: "snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1"
  unit_of_measurement: "A"
  value_template: '{{ value | multiply(10) }}'

Switch

    pdu1_1:
      command_on: "snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1"
      command_off: "snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2"
      command_state: "snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1"
      value_template: '{{ value == "1" }}'
      friendly_name: pdu1 1

SonOff

- platform: mqtt
  name: "Grote zaal rechts"
  state_topic: "space/grotezaal/rechts/1/stat"
  command_topic: "space/grotezaal/rechts/1"
  qos: 0
  payload_on: "on"
  payload_off: "off"
  retain: true