3D Printing Made Easy: Difference between revisions

Latest revision as of 13:04, 10 September 2022

IMPORTANT: The content of this section is outdated. Please update this section if you can. If you have checked or updated this section and found the content to be suitable, please remove this notice.

TL;DR

On PrinterPC: Download STL for model, and slice with ~~S3D~~ Cura, its on the desktop.
Open the browser, connect to one of the printers, and upload your gcode
Pre-heat both the bed and the head to the correct temperatures
Press print

Introduction

Ever wanted to 3d print but dont have the knowledge to 3d print? Want to just print an object w/o having to be a electromechanical engineer? This guide is for you! To facilitate easy printing in our space, The Niz, Pokon and r3boot are working on a user-friendly setup in the print corner.

3D printing fundamentals

3D printing is the process of taking a digital object, and turning this into a physical object. The actual printer works using a heated nozzle, through which plastic is pushed (extruded), which melts in the process. The molten plastic is pushed through a tiny nozzle, which allows you to make very fine lines. This heated nozzle is mounted on a frame which allows the nozzle to move in the X, Y and Z directions, using stepper motors. This construction is hooked up to a microcontroller, which accepts gcode instructions. These gcode instructions tell the printer to perform a certain operation, eg: move the X axis by +10 steps, or extrude 5mm of plastic. This allows the 3d printer to 'draw' your object, layer by layer.

A 3d object is created using your favourite 3d design software, eg: Fusion360, Freecad, OpenSCAD, SolidWorks, Tinkercad, Blender. To use this object with 3d printers, it must be saved (or converted) to the STL file format. Since 3d printers only understand gcode, you need to use a so-called slicer to convert your STL into gcode. The slicer takes the STL, which consists of 3d vectors, and converts this to a program which will actually draw the object, line-by-line, layer-by-layer, using gcode.

The resulting gcode file can be uploaded to the printer using a FAT formatted SD card, or by uploading the file using OctoPrint, if the printer has this configured.

Our Setup

Globally speaking, our 3d printer setup consists of a bunch of printers which all have their own raspberry pi 3b+ attached running octoprint. Furthermore, a dedicated PC has been configured in the printer corner for usage with the octoprint instances (however, you are free to directly use octoprint from your laptop as well).

PrinterPC

A PC running ubuntu has been configured for dedicated usage with the printers. This PC can be found in the print corner, and you can login to that machine using the well-known wifi password. This machine has a copy of Simplify3D, ~~an easy-to-use and capable slicer, which is pre-configured with profiles for all printers (but see TODO).~~ a very old and proprietary slicer, PLEASE USE CURA.

Simplify3D

PLEASE DO NOT USE

Slicing a model with S3D is is a simple 3-step process. Start off by importing a new model:

Next, select the profile corresponding to the printer you want to use, and press the print button:

And finally, save the gcode:

Cura is on the desktop and has actually current profiles and updates. S3D does NOT and gets no updates EVER.

Printing

Once you have a file containing gcode, you can start your print. To control a printer, connect to it's octoprint instance via your webbrowser. Start off by pre-heating the head and the bed by selecting the temperatures corresponding to the material you are printing:

Next, upload your gcode using the 'import' button, and press the print icon:

And now .. you wait, until your print is done :)

3d printer urls

You can directly connect to the 3d printers using the urls below:

Anet A8	http://printer2.local
Creality Ender 3	http://printer3.local

Cost of printing

Right now, there is no process for managing the cost of the filament. If there is plastic, you can print, else you will have to bring your own. If you print on a regular basis, it would be appreciated if you also sponsor 1/more spools of filament.

TODO

Add machines to DNS
Add Anet A8 profile to S3D
Add paragraph wrt bed levelling
Add paragraph wrt proper object placement for slicing
Add links to 3d printer pages

@@ Line 2: / Line 2: @@
 === TL;DR ===
-* On PrinterPC: Download STL for model, and slice with S3D.
+* On PrinterPC: Download STL for model, and slice with <s>S3D</s> Cura, its on the desktop.
 * Open the browser, connect to one of the printers, and upload your gcode
 * Pre-heat both the bed and the head to the correct temperatures
@@ Line 21: / Line 21: @@
 === PrinterPC ===
-A PC running ubuntu has been configured for dedicated usage with the printers. This PC can be found in the print corner, and you can login to that machine using the well-known wifi password. This machine has a copy of Simplify3D, an easy-to-use and capable slicer, which is pre-configured with profiles for all printers (but see TODO).
+A PC running ubuntu has been configured for dedicated usage with the printers. This PC can be found in the print corner, and you can login to that machine using the well-known wifi password. This machine has a copy of Simplify3D, <s>an easy-to-use and capable slicer, which is pre-configured with profiles for all printers (but see TODO).</s> a very old and proprietary slicer, PLEASE USE CURA.
 === Simplify3D ===
@@ Line 39: / Line 38: @@
-Cura is on the desktop and has actually current profiles and updates. S3D does NOT and gets no updates EVER.
+'''Cura is on the desktop and has actually current profiles and updates. S3D does NOT and gets no updates EVER.
+'''
 === Printing ===