Sonic Amplifier: Difference between revisions

Latest revision as of 18:42, 25 January 2020

Melan, Boopatroopa

Participants	Melan
Skills	Programming, soldering, 3D printing, rijst eten
Status	Done
Niche	Artsy stuff
Purpose	Fun
Tool	No
Location
Cost
Tool category

Melan, Boopatroopa Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

A friend (Boopatroopa) wants a real life replica of the Sonic Amplifier of Lucio from Overwatch. We are attempting to make him one, the deadline is in two months starting from 21 Sep 2019.

Wiki page still has to be updated with new information tbh

Based on https://www.thingiverse.com/thing:2034258

Parts ordered

~~3x RGB LED Ring 16 Bit WS2812~~ All three have arrived.
~~RGB LED Ring 60 Bit WS2812~~ Arrived, one part of the ring has a dead led.
~~WS2812B 1m strip~~, ~~ordered a new one with more leds~~
~~3x RGB LED 8bit~~ Arrived.

~~MEGA2560 PRO EMBED~~ ~~arrived, and working~~ swapped for teensy
230 pcs JST connectors
Mometary switch
~~VS1003B Module~~ ~~arrived, not yet tested~~ Not needed
~~sd card reader~~ ~~arrived, tested to be working~~ Not needed
~~DC 12V-24V 2x50W Dual AMP~~ arrived

Parts

TODO

~~Poke Pokon for the 3D prints~~ Pokon has been poked and printing has started
Figure out the speakers
~~Figure out what MCU to use~~ ~~Ordered a MEGA2560~~ going with a Teensy
Figure out what battery to use
~~Figure out what amplifier to use~~
Figure out the LED patterns and audio samples
~~Use a VS1053 for sound?~~ Nah, Teensy.

Adafruit guides

https://learn.adafruit.com/overwatch-prop-gun-lucios-blaster-pt-3 https://learn.adafruit.com/overwatch-lucio-gun-pt-2 https://learn.adafruit.com/overwatch-lucio-gun-pt1

Would be nice

Bluetooth build in with a switch so we can switch between the onboard audio and a phone
Volume control

@@ Line 2: / Line 2: @@
 |Name=Melan, Boopatroopa
 |Skills=Programming, soldering, 3D printing, rijst eten,
-|Status=Active
+|Status=Done
 |Niche=Artsy stuff
 |Purpose=Fun
@@ Line 8: / Line 8: @@
 }}
 A friend (Boopatroopa) wants a real life replica of the Sonic Amplifier of Lucio from Overwatch. We are attempting to make him one, the deadline is in two months starting from 21 Sep 2019.
+'''Wiki page still has to be updated with new information tbh'''
 Based on https://www.thingiverse.com/thing:2034258
+== Parts ordered ==
+* <s>3x RGB LED Ring 16 Bit WS2812</s> All three have arrived.
+* <s>RGB LED Ring 60 Bit WS2812</s> Arrived, one part of the ring has a dead led.
+* <s>WS2812B 1m strip</s>, <s>ordered a new one with more leds </s>
+* <s>3x RGB LED 8bit</s> Arrived.
+* <s>MEGA2560 PRO EMBED</s> <s>arrived, and working</s> swapped for teensy
+* 230 pcs JST connectors
+* Mometary switch
+* <s>VS1003B Module</s> <s>arrived, not yet tested</s> Not needed
+* <s>sd card reader</s> <s>arrived, tested to be working</s> Not needed
+* <s>DC 12V-24V 2x50W Dual AMP</s> arrived
 == Parts ==
@@ Line 15: / Line 30: @@
 * [https://www.aliexpress.com/item/32908613785.html?spm=a2g0o.productlist.0.0.2ca842c9kQuPI6&algo_pvid=8f7390e3-c7cb-4599-9c96-1aff0531b7e7&algo_expid=8f7390e3-c7cb-4599-9c96-1aff0531b7e7-0&btsid=74dff6d7-d05f-4df6-8abd-d542e79fd281&ws_ab_test=searchweb0_0,searchweb201602_4,searchweb201603_53 RGB LED Ring 16 Bit WS2812 ]
 * [https://www.aliexpress.com/item/32908613785.html?spm=a2g0o.productlist.0.0.2ca842c9kQuPI6&algo_pvid=8f7390e3-c7cb-4599-9c96-1aff0531b7e7&algo_expid=8f7390e3-c7cb-4599-9c96-1aff0531b7e7-0&btsid=74dff6d7-d05f-4df6-8abd-d542e79fd281&ws_ab_test=searchweb0_0,searchweb201602_4,searchweb201603_53 5m 5V WS2812B WS2812 ]
+* [https://www.aliexpress.com/item/32968615346.html?spm=a2g0o.cart.0.0.61db3c006LR8wH&mp=1 MEGA2560 PRO EMBED ]
+* [https://www.aliexpress.com/item/32992056830.html?spm=a2g0s.9042311.0.0.27424c4ddoeAaG DC 12V-24V 2x50W Dual AMP]
+* [https://www.aliexpress.com/item/32966454016.html?spm=a2g0s.9042311.0.0.27424c4ddoeAaG VS1003B Module]
 == TODO ==
-* Poke Pokon for the 3D prints
+* <s>Poke Pokon for the 3D prints</s> Pokon has been poked and printing has started
-* Figure out how many pins we need on a MCU
-* Find a propre MCU
 * Figure out the speakers
-* Figure out what MCU to use
+* <s>Figure out what MCU to use</s> <s>Ordered a MEGA2560</s> going with a Teensy
 * Figure out what battery to use
-* Figure out what amplifier to use
+* <s>Figure out what amplifier to use</s>
 * Figure out the LED patterns and audio samples
-* Use a VS1053 for sound?
+* <s>Use a VS1053 for sound?</s> Nah, Teensy.
+== Adafruit guides ==
+https://learn.adafruit.com/overwatch-prop-gun-lucios-blaster-pt-3
+https://learn.adafruit.com/overwatch-lucio-gun-pt-2
+https://learn.adafruit.com/overwatch-lucio-gun-pt1
 == Would be nice ==
 * Bluetooth build in with a switch so we can switch between the onboard audio and a phone
 * Volume control