Floralab Summagraphics T750: Difference between revisions

Revision as of 00:36, 5 October 2022

FloraLab_T750.JPG {{#if:Yes | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:Yes | [[Tool Cost::{{{Cost}}} | }}

FloraLab bruikleen'd us their SummaGraphics T750 that needs some cleaning and setup.

Order materials and some specific-ish tools. https://lists.as65342.net/pipermail/nurds/2022-October/000120.html
Build a stand?
Setup inkscape/usbrs232/something on some pc/pi/fruit.
Write some mini manual.

Some example materials that are suitable for this kind of plotter. (Provided we have the pens/knifes that are suitable for it)

120g/m² paper on roll.

These could be whole panels for electronics too, the sticker does not have to be a single 'body'.

Application tape is where you 'store' the cut vinyl before you apply it as a sticker.

Vinyl to cut (0.05mm to 0.25mm thick)

Vinyl to cut (0.05mm to 0.25mm thick)

The same heat transfer as for tshirts can be used for mugs, phonecases, mousemats, etc.

@@ Line 32: / Line 32: @@
 == Todo ==
-* Order materials and some specific-ish tools.
+* Order materials and some specific-ish tools. https://lists.as65342.net/pipermail/nurds/2022-October/000120.html
 * Build a stand?
 * Setup inkscape/usbrs232/something on some pc/pi/fruit.