Configuration of a brocade poe switch

howto config a brocade switch
Participants
Skills	Programming, coding
Status	Active as fuck
Niche	Documentation
Purpose	Infra
Tool	No
Location	Space
Cost	0
Tool category	Infra

howto config a brocade switch Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::0 | }}

If you don't know the root password take the next steps:

1. connect a serial cable to er serial port from the switch & pc, open a serial communication program with folling settings: 9600 8n1 and none flow control.
2. on power up pres the b button.
3. Enter on the prompt no password you cant abbr.
4. Enter on the prompt "'boot system flash primary'".
5. Enter on the prompt enable
6. Enter on the prompt configure terminal
7. Enter on the prompt enable super-user-pasword password
8. Enter on the prompt enable port-config-pasword password
9. Enter on the prompt enable read-only-pasword password
10. write memory # to save the settings

0/1/portnr. Config ports all lacp:

1. edge port nr: 39 40
2. Synology :41,42
3. erratic: 43,44

switch 1 a fours four ports trunk: 45,46,47,48 Howto config: trunk ethernet 0/1/45 to 0/1/448 trunk ethernet 0/1/43 to 0/1/44 trunk ethernet 0/1/41 to 0/1/42 trunk ethernet 0/1/39 to 0/1/40 write memory

trunk deploy.

1. you can name the ports alone 1 port of a trunk with next command:

interface ethernet 0/1/45 port-name switch1 interface ethernet 0/1/43 port-name synolgic interface ethernet 0/1/41 port-name erratic interface ethernet 0/1/39 port-name edge interface ethernet 0/1/1 port-name config write memory BR-Serverrack(config-vlan-1)#webauth BR-Serverrack(config-vlan-1-webauth)#enable BR-Serverrack(config-vlan-1-webauth)#exit BR-Serverrack(config-vlan-1)#loca BR-Serverrack(config-vlan-1)#local BR-Serverrack(config-vlan-1)#local- BR-Serverrack(config-vlan-1)#exit BR-Serverrack(config)#loca

 local-userdb                  Configure local user database

BR-Serverrack(config)#local-userdb

 ASCII string   <Local user database name (Max 31 characters)>

BR-Serverrack(config)#local-userdb admindb