No edit summary |
m (→OpenNI2) |
||
| Line 35: | Line 35: | ||
=== OpenNI2 === | === OpenNI2 === | ||
Super easy. Just need to undo part of [https://github.com/kalectro/OpenNI2/commit/56cc12233eed6aea9efe9f64254d507e183dbef4 this commit]. | |||
git clone https://github.com/kalectro/OpenNI2.git | git clone https://github.com/kalectro/OpenNI2.git | ||
cd OpenNI2/ | |||
sed -i s/armv7/armv7-a/g ThirdParty/PSCommon/BuildSystem/Platform.Arm | sed -i s/armv7/armv7-a/g ThirdParty/PSCommon/BuildSystem/Platform.Arm | ||
make -j 4 | make -j 4 | ||
Revision as of 15:11, 21 February 2015
| ROS on a Raspberry Pi2 with a Xbox360 Kinect Sensor | |
|---|---|
 | |
| Participants | |
| Skills | Software, Vendor specific software |
| Status | Active |
| Niche | Software |
| Purpose | Use in other project |
| Tool | No |
| Location | |
| Cost | |
| Tool category | |
ROS on a Raspberry Pi2 with a Xbox360 Kinect Sensor
Brain-chip.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost:: | }}
What do we want
- ROS installed and functional
- Kinect sensor attached, powered and working with ROS (as depth images)
Where are you going to run this
On a Raspberry Pi2. Although 99.9999% is reproducable on Pi1.
We are also going to try to process data externally, over wifi or ethernet, or something...
What were the starting points
Woah! How do I do this?
ROS
OpenNI
sudo apt-get install git g++ python libusb-1.0-0-dev freeglut3-dev openjdk-6-jdk graphviz mkdir -p OpenNI/stable; cd OpenNI/;
OpenNI2
Super easy. Just need to undo part of this commit.
git clone https://github.com/kalectro/OpenNI2.git cd OpenNI2/ sed -i s/armv7/armv7-a/g ThirdParty/PSCommon/BuildSystem/Platform.Arm make -j 4
OpenCV
What did we learn along the way
- eh