No edit summary |
No edit summary |
||
| Line 16: | Line 16: | ||
Making changes to the configuration can be done via the [http://c353616.r16.cf1.rackcdn.com/NexiaSetup3.3.exe windows software] which also runs fine in Wine under Linux. The key is to connect to the Nexia, then disconnect from it, edit the configuration and then upload it again. When in doubt, save the old config first! | Making changes to the configuration can be done via the [http://c353616.r16.cf1.rackcdn.com/NexiaSetup3.3.exe windows software] which also runs fine in Wine under Linux. The key is to connect to the Nexia, then disconnect from it, edit the configuration and then upload it again. When in doubt, save the old config first! | ||
To connect with the software, change your static IP to 192.168. | To connect with the software, change your static IP to 192.168.1.100. | ||
Go to Tools, Options, Network. | Go to Tools, Options, Network. | ||
Press Select NIC and select the configured network controller. | Press Select NIC and select the configured network controller. | ||
Revision as of 22:47, 28 April 2017
| NURDs Inventory | |
|---|---|
 | |
| Owner | Space |
| Status | Infrastructure |
| Hostname | nexia.nurdspace.lan |
| Location | Small 19" rack in the space |
| Tool | |
| Tool category | |
{{{Name}}}Property "Tool Name" (as page type) with input value "{{{Name}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.
NEXIA_PM.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Small 19" rack in the space
This is a digital mixing panel with lots of inputs and outputs. Currently it has 3 channels open:
- Input from Slab for MPD
- Input from the Logitech bluetooth speaker adapter
- Minijack audio connector on a long RCA cable
These are mixed and outputted to 2 Altec Lansing 9444A amplifiers at the bottom of the rack.
Making changes to the configuration can be done via the windows software which also runs fine in Wine under Linux. The key is to connect to the Nexia, then disconnect from it, edit the configuration and then upload it again. When in doubt, save the old config first!
To connect with the software, change your static IP to 192.168.1.100. Go to Tools, Options, Network. Press Select NIC and select the configured network controller.
The device also has a telnet interface. One example command:
echo 'GET 1 IPADDR' |nc nexia 23
More info on Telnet commands: File:Nexia_RS232_Control_(Jan10).pdf