Space status: Difference between revisions

Revision as of 20:20, 29 December 2017

Space status

Participants	Bjornl, User:buzz
Skills	coding, Micro-electronics
Status	Production
Niche	Software
Purpose	Infrastructure
Tool	No
Location
Cost
Tool category

Space status

20170427_223424.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Goal: (semi)automatic updates when space opens and closes.

How

switch -> SpaceNanny -> Vinculum -> status container -> nfsmount naar nurdservices -> json file -> internal website -> Nurdbot

Media

IRC -> done
Twitter -> http://twitter4j.org/en/index.html <- It would be sw33t to auto-spam twitter with activity in our space -> done
Space API JSON: -> done
Wiki -> shows status on frontpage
~~'Wall': have the start page of our site display all sorts of live info and put the wiki behind a link.~~ See above, we use a widget on the wiki to show this stuff
Facebook: has been linked to the Twitter feed (yech)

Trigger

Giant switch next to the door

Stuff dependent on space status

See Jarvis

Previous incarnation

https://github.com/bjornlammers/nurdspace/tree/master/spacebot-arduino

old hardware pcb (broken now)
drawing of the circuit

Log

10 april 2012

Since we have internet, we can now have updates! First step is the iBook G4 that runs a small Java IRC bot that can be controlled from the console by typing 'o' or 'c' (for 'open' and 'close'). It then updates the space status in the #nurds topic. ~~Next step is a GUI (Swing).~~

12 april 2012

An LDR has been connected to the half-broken Arduino and the iBook has been freed of its duties. buZz installed Java on the Dockstar and the software runs there now. The Arduino has been connected and everything works. We also proved that the bot can send DMX commands, currently fading in the only lamp connected as the space opens and fading it out as it closes.

18 april 2012

DS18B20 has been connected! You can now query the lights status, temperature or a summary using !lights, !temp and !status.

19 april 2012

DS18B20 no longer functioning :( stopped working when soldering everything to a board. LDR gives wrong readings. Unfortunately, we can't seem to find out what's wrong...

23 april 2012

Faulty soldering of the 100 kOhm pull-down resistor for the LDR was at least partly to blame. LDR works correctly again and SpaceBot has been restarted. DS18B20 has been removed for now.

25 april 2012

Everything has been resoldered and a spare DS18B20 is used now. Everything seems to work again.

29 april 2012

Complete redesign of sources, which makes it easier to integrate new media. Twitter updater added. Space API JSON added.

30 april 2012

Added temperature to the Space API JSON.

october 2012

Status is now controlled by the locks.

august 2013

Everything will have to be redone now that we've moved to a new location.

october 2017

current status ; switch -> spacenanny -> vinculum -> status -> nfsmount naar nurdservices -> json file -> website -> nurdbot

@@ Line 8: / Line 8: @@
 |Tool=No
 }}
-'''This page needs updating'''
 Goal: (semi)automatic updates when space opens and closes.
+== How ==
+switch -> [[SpaceNanny]] -> [[Vinculum]] -> status container -> nfsmount naar nurdservices -> json file -> internal website -> [[Nurdbot]]
 == Media ==
 * IRC -> done
@@ Line 26: / Line 25: @@
 * See [[Jarvis]]
 == Previous incarnation ==
+https://github.com/bjornlammers/nurdspace/tree/master/spacebot-arduino
 <gallery>
 image:Spacebot hw.jpg|old hardware pcb (broken now)
@@ Line 63: / Line 63: @@
 === october 2017 ===
 current status ; switch -> spacenanny -> vinculum -> status -> nfsmount naar nurdservices -> json file -> website -> nurdbot
-== Sources ==
-<s>All Arduino sources have been checked in to the Subversion repository 'nurdspace' under /spacebot/arduino</s>
-https://github.com/bjornlammers/nurdspace/tree/master/spacebot-arduino
-== Further steps ==
-Further steps may include:
-* <s>connect an Arduino to the iBook and access it using a Java API (you'll need http://silveiraneto.net/2009/03/01/arduino-and-java/ );</s>
-* <s>connect a Big Red Button to the Arduino to control space status;</s> automatic > manual
-* <s>LDR close to the fluorescent lighting connected to the Arduino;</s>
-* <s>complete redesign of code, it's messy as hell now;</s>
-* <s>redesign of hardware, it's messy as hell now;</s>
-* <s>incorporating the temperature sensor (currently on the Teensy) on the Arduino;</s>
-* <s>fix and/or replace DS18B20</s>
-* <s>fix LDR</s>
-* <s>detection inside the locks connected to the Arduino</s>
-* separate lamp to announce space status (connected to the dimmer);