| Jarvis | |
|---|---|
 | |
| Participants | Dennis |
| Skills | Electronics, IoT |
| Status | Production |
| Niche | |
| Purpose | Infra |
| Tool | No |
| Location | |
| Cost | |
| Tool category | |
Jarvis Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
Jarvis is the VM running Home Assistant (HASS) and is able to automate tasks in the space
See http://10.208.11.32/ or http://10.208.11.32:8123 when port 80 is not working (todo: finding out where this forward is done and fix it)
Starting HASS
HASS does not start on container boot (yes). You need to do this:
/etc/init.d/homeassistant install /etc/init.d/homeassistant start
Changelog
- Added the EPC PDU's to HASS
- Added the space state
- Added power usage
Current Automations
- Stop music on mpd when the space is closed
- Start music on mpd when the space opens.
Custom stuff
EPC (PDU)
http://wiki.gude.info/FAQ_EPC_CmdLine
root@jarvis:/home/homeassistant/.homeassistant# cat switches.yaml
- platform: command_line
switches:
epc2_1:
command_on: "/usr/bin/curl http://<IP>/SWOV.CGI?s1=1"
command_off: "/usr/bin/curl http://<IP>/SWOV.CGI?s1=0"
command_state: "/opt/epc/epccontrol2.pl --host=<IP> | grep 1"
value_template: '{{ value == "1 is ON" }}'
friendly_name: epc2 1
APC (PDU)
Off snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2 On snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1 get snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 output 1 == on 2 == off get input amps (x10) snmpget -v1 -OvqU -c NURDsnmp 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1
Sensor (Amps)
- platform: command_line
name: pdu1_input_amps
command: "snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1"
unit_of_measurement: "A"
value_template: '{{ value | multiply(10) }}'
Switch
pdu1_1:
command_on: "snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1"
command_off: "snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2"
command_state: "snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1"
value_template: '{{ value == "1" }}'
friendly_name: pdu1 1