Jarvis

Jarvis

Participants	Dennis
Skills	Electronics, IoT
Status	Production
Niche
Purpose	Infra
Tool	No
Location
Cost
Tool category

Jarvis Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Jarvis is the VM running Home Assistant (HASS) and is able to automate tasks in the space See http://10.208.11.32/ or http://10.208.11.32:8123 when port 80 is not working. Port 80 should work because of a port forward started from /etc/rc.local.

Starting HASS

/etc/init.d/homeassistant install
/etc/init.d/homeassistant start

It should do this on boot through /etc/rc.local.

Current Automations

Stop music on mpd when the space is closed
Start music on mpd when the space opens.
Power down EPC/APC and Sonoff when space is closed.
Power up Sonoff when space is open.

Custom stuff

OpenTherm Gateway

OpenTherm gateway has been put between the heater and the thermostat, see OpenTherm_Gateway

Flukso

Runs stuff for power meter, see Flukso.

EPC (PDU)

https://gist.github.com/zarya/52b603146faac2b3d42e417532975054

- platform: command_line
  switches:
    epc2_1:
      command_on: "/config/epc.py <IP> 1 1"
      command_off: "/config/epc.py <IP> 1 0"
      command_state: "/config/epc.py <IP> 1"
      value_template: '{{ value == "ON" }}'

http://wiki.gude.info/FAQ_EPC_CmdLine

 root@jarvis:/home/homeassistant/.homeassistant# cat switches.yaml 
 - platform: command_line
  switches:
    epc2_1:
      command_on: "/usr/bin/curl http://<IP>/SWOV.CGI?s1=1"
      command_off: "/usr/bin/curl http://<IP>/SWOV.CGI?s1=0"
      command_state: "/opt/epc/epccontrol2.pl --host=<IP> | grep 1"
      value_template: '{{ value == "1 is ON" }}'
      friendly_name: epc2 1

APC (PDU)

Off snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2 
On snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1
get snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1
output 1 == on 2 == off
get input amps (x10) snmpget -v1 -OvqU -c NURDsnmp 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1

Sensor (Amps)

- platform: snmp
  name: 'pdu1_input_amps'
  host: <IP>
  community: "this"
  baseoid: .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1
  version: "1"
  accept_errors: true
  unit_of_measurement: 'A'
  value_template: '{{ value | float / 10 }}'

OLD:

- platform: command_line
  name: pdu1_input_amps 
  command: "snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1"
  unit_of_measurement: "A"
  value_template: '{{ value | multiply(10) }}'

Switch

- platform: snmp
  name: pdu1_1
  host: <IP>
  baseoid: .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1
  community: "this"
  payload_on: 1
  payload_off: 2
  version: "1"
- platform: snmp
  name: pdu1_1
  host: <IP>
  baseoid: .1.3.6.1.4.1.318.1.1.4.4.2.1.3.2
  community: "this"
  payload_on: 1
  payload_off: 2
  version: "1"

OLD:

    pdu1_1:
      command_on: "snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1"
      command_off: "snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2"
      command_state: "snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1"
      value_template: '{{ value == "1" }}'
      friendly_name: pdu1 1

SonOff

- platform: mqtt
  name: "Grote zaal rechts"
  state_topic: "space/grotezaal/rechts/1/stat"
  command_topic: "space/grotezaal/rechts/1"
  qos: 0
  payload_on: "on"
  payload_off: "off"
  retain: true

Changelog

Added the EPC PDU's to HASS
Added the space state
Added power usage
Added Axis camera
Added grote zaal rechts (TL)
Added Webcam connected to SlabPi

New jarvis

We want to be able to easily update home assistant. One way to achieve this is to use docker. On our proxmox environment it is not easy to run docker in a proxmox container, so we set up a prober VM for this.

The idea is to get the config from the old jarvis working and at some point have the new one take the IP address of the old one. For now the new one is configged with DHCP.

Temp IP: 10.208.42.142
User: nurds
Pass: the long one :)

Docker installation

Home assistant config location: /usr/share/hassio/homeassistant# Enabled docker repo and installed it (https://docs.docker.com/install/linux/docker-ce/ubuntu/). User nurds is in the docker group so it can do docker things without sudo.

Installed HASS.IO x86 https://www.home-assistant.io/blog/2017/11/29/hassio-virtual-machine/ Using the install script https://raw.githubusercontent.com/home-assistant/hassio-build/master/install/hassio_install

Actions done

Add all mqtt sensors
Add all other config that works out of the box
Migrate APC power bar scripts
- on/off
- Amp meter
Migrate noname power bar scripts

Actions open

Migrate nurdbot notifier
Migrate all automations

Web interface

user: nurds
pass: same as wifi ask in the space

To Do

Radiator automation integration.