| CoreXYnetA6 | |
|---|---|
 | |
| Participants | User:buzz |
| Skills | Mechanics, reprap, 3D Printing |
| Status | Planning |
| Niche | Hardware |
| Purpose | Tool |
| Tool | No |
| Location | |
| Cost | |
| Tool category | |
Corexy-schematic.png {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
Why
Pokon gifted me a Anet A6 to remix. This page documents what i want to do with it.
What
I want to build a corexy printer and reach mad speeds. We have a pile of aluminium extrusion on which i want to base the frame.
Wishes
- do >200mm/s comfortably
- be heavy
- require no parts i do not already have access to
Wparts
from anet a6 :
- heated bed 220x220x3mm (i dont know if this is still around?)
- 12864 lcd and dubious electronics
- T8 leadscrews (2x 318mm)
- M8 threaded rods (2x 400mm, 1x 150mm)
- 8MM smooth rods (2x 418mm , 2x 380mm , 2x 340mm)
- ~40 M3x18mm bolts and nuts
- ~15 M4x8mm bolts
- 3x endstop switches with too short wires (but it comes with some 400mm extenders? hmm)
- 4x nema17 motors , 2 of them look smallish...
- 1x extruder , not sure what this is
- 4x linear bearing , looks like a SC8UU or SCS8UU
- 5015 radial fan
- some more linear bearings and the leadscrew nuts are inside the Z axis nut supports and the extruder
alloted :
- 12x 30x60 extrusion 469mm long
still to get a purpose :
- 2x 30x60 extrusion 520mm long
- 4x 30x30 extrusion 500mm long
- 2x 30x30 extrusion 483mm long
- there's also some parts of 2020 extrusion somewhere
Winspiration
- https://www.thingiverse.com/thing:1752766 - HyperCube 3D Printer/CNC
- https://www.thingiverse.com/thing:2503636 - The BEST 3030 corners. Single and dual.