| howto config a brocade switch | |
|---|---|
 | |
| Participants | |
| Skills | Programming, coding |
| Status | Active as fuck |
| Niche | Documentation |
| Purpose | Infra |
| Tool | No |
| Location | Space |
| Cost | 0 |
| Tool category | Infra |
howto config a brocade switch Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::0 | }}
If you don't know the root password take the next steps:
- connect a serial cable to er serial port from the switch & pc, open a serial communication program with next, settings: 9600 8n1 and none flow control.
- on power up pres the b button.
- Enter on the prompt no password you cant abbr.
- Enter on the prompt "'boot system flash primary'".
- Enter on the prompt enable
- Enter on the prompt configure terminal
- Enter on the prompt enable super-user-pasword password
- Enter on the prompt enable port-config-pasword password
- Enter on the prompt enable read-only-pasword password
- write memory # to save the settings
0/1/portnr. Config ports all lacp:
- edge port nr: 39 40
- Synology :41,42
- erratic: 43,44
switch 1 a fours four ports trunk: 45,46,47,48 Howto config:
trunk ethernet 0/1/45 to 0/1/44 trunk ethernet 0/1/43 to 0/1/44 trunk ethernet 0/1/41 to 0/1/42 trunk ethernet 0/1/39 to 0/1/40 write memory trunk deploy.
- you can name the ports alone 1 port of a trunk with next command:
interface ethernet 0/1/45 port-name switch1 interface ethernet 0/1/43 port-name synolgic interface ethernet 0/1/41 port-name erratic interface ethernet 0/1/39 port-name edge interface ethernet 0/1/1 port-name config write memory BR-Serverrack(config-vlan-1)#webauth BR-Serverrack(config-vlan-1-webauth)#enable BR-Serverrack(config-vlan-1-webauth)#exit BR-Serverrack(config-vlan-1)#loca BR-Serverrack(config-vlan-1)#local BR-Serverrack(config-vlan-1)#local- BR-Serverrack(config-vlan-1)#exit BR-Serverrack(config)#loca
local-userdb Configure local user database
BR-Serverrack(config)#local-userdb
ASCII string <Local user database name (Max 31 characters)>
BR-Serverrack(config)#local-userdb admindb