Jarvis

Jarvis

Participants	Dennis
Skills	Electronics, IoT
Status	Production
Niche
Purpose	Infra
Tool	No
Location
Cost
Tool category

Jarvis Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}

Jarvis is the VM running Home Assistant (HASS) and is able to automate tasks in the space See http://10.208.11.32/ or http://10.208.11.32:8123 when port 80 is not working. Port 80 should work because of a port forward started from /etc/rc.local.

Starting HASS

/etc/init.d/homeassistant install
/etc/init.d/homeassistant start

It should do this on boot through /etc/rc.local.

Changelog

Added the EPC PDU's to HASS
Added the space state
Added power usage
Added Axis camera
Added grote zaal rechts (TL)
Added Webcam connected to SlabPi

Current Automations

Stop music on mpd when the space is closed
Start music on mpd when the space opens.
Power down EPC/APC and Sonoff when space is closed.
Power up Sonoff when space is open.

Custom stuff

Flukso

Runs stuff for power meter, see Flukso.

EPC (PDU)

http://wiki.gude.info/FAQ_EPC_CmdLine

 root@jarvis:/home/homeassistant/.homeassistant# cat switches.yaml 
 - platform: command_line
  switches:
    epc2_1:
      command_on: "/usr/bin/curl http://<IP>/SWOV.CGI?s1=1"
      command_off: "/usr/bin/curl http://<IP>/SWOV.CGI?s1=0"
      command_state: "/opt/epc/epccontrol2.pl --host=<IP> | grep 1"
      value_template: '{{ value == "1 is ON" }}'
      friendly_name: epc2 1

APC (PDU)

Off snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2 
On snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1
get snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1
output 1 == on 2 == off
get input amps (x10) snmpget -v1 -OvqU -c NURDsnmp 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1

Sensor (Amps)

- platform: command_line
  name: pdu1_input_amps 
  command: "snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.1"
  unit_of_measurement: "A"
  value_template: '{{ value | multiply(10) }}'

Switch

    pdu1_1:
      command_on: "snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 1"
      command_off: "snmpset -v1 -c private 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1 i 2"
      command_state: "snmpget -v1 -OvqU -c public 10.208.30.150 .1.3.6.1.4.1.318.1.1.4.4.2.1.3.1"
      value_template: '{{ value == "1" }}'
      friendly_name: pdu1 1

SonOff

- platform: mqtt
  name: "Grote zaal rechts"
  state_topic: "space/grotezaal/rechts/1/stat"
  command_topic: "space/grotezaal/rechts/1"
  qos: 0
  payload_on: "on"
  payload_off: "off"
  retain: true