No edit summary |
No edit summary |
||
| (13 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
|Name=Power meter | |Name=Power meter | ||
|Skills=Electronics, | |Skills=Electronics, | ||
|Status= | |Status=Replaced | ||
|Niche=Electronics | |Niche=Electronics | ||
|Purpose=Infra | |Purpose=Infra | ||
|Tool=No | |Tool=No | ||
}} | }} | ||
Power meter for the space power usage | Power meter for the space power usage. Used to run [https://github.com/xoseperez/espurna Espurna] but it is supported by [https://esphome.io/ ESPhome] now. | ||
Since we needed to flash a fresh ESP8266 board anyway, we will try to use ESPHome. | |||
== Hardware == | |||
* ESP8266 (Lolin NodeMCU v3) | |||
* pzem-004t (V2.0 printed on PCB) (aliexpress) | |||
[[File:Selection_022.png]] | |||
== Todo == | == Todo == | ||
* Install sensor | * <s>Install sensor</s> | ||
* Install value storage software | * <s>Install value storage software</s> (InfluxDB on 10.208.11.31) | ||
* Install graphing frontend | * <s>Install graphing frontend</s> (Grafa on https://metrics.nurd.space) | ||
* Print a case because of live 230V AC on terminals | |||
* Config ESPhome, possibly using [https://esphome.io/components/sensor/pzemac.html this (V3)] or [https://esphome.io/components/sensor/pzemac.html this (V1)]. We have a V2 so we might be out of luck here. Basic config with OTA done and added to [[Jarvis]]. | |||
* Fix home assistant bits | |||
* Clean up old bits (MQTT and such, old topic: power/main/#) | |||
Latest revision as of 00:32, 28 December 2022
| Power meter | |
|---|---|
 | |
| Participants | |
| Skills | Electronics |
| Status | Replaced |
| Niche | Electronics |
| Purpose | Infra |
| Tool | No |
| Location | |
| Cost | |
| Tool category | |
Power meter Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
Power meter for the space power usage. Used to run Espurna but it is supported by ESPhome now. Since we needed to flash a fresh ESP8266 board anyway, we will try to use ESPHome.
Hardware
- ESP8266 (Lolin NodeMCU v3)
- pzem-004t (V2.0 printed on PCB) (aliexpress)
Todo
Install sensorInstall value storage software(InfluxDB on 10.208.11.31)Install graphing frontend(Grafa on https://metrics.nurd.space)- Print a case because of live 230V AC on terminals
- Config ESPhome, possibly using this (V3) or this (V1). We have a V2 so we might be out of luck here. Basic config with OTA done and added to Jarvis.
- Fix home assistant bits
- Clean up old bits (MQTT and such, old topic: power/main/#)