| SlabPi | |
|---|---|
 | |
| Owner | Invict |
| Status | Infra |
| Hostname | slabpi.dhcp.nurd.space |
| Location | Near the amp |
| Tool | No |
| Tool category | |
Slabpi2.jpg {{{InventoryOwner}}}Property "Tool Owner" (as page type) with input value "{{{InventoryOwner}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. Near the amp
What
SlabPi is the replacement for Slab on a Raspberry Pi 3. It has been moved, because of downscaling. It will be challenged with as much infra a Raspberry Pi can handle.
It runs the MPD Server and espeak. It is running on Raspbian Stretch Lite.
A DAC+ Hat has been added for better audio quality.
Networking
It is hooked up with UTP. WLAN has been disabled.
DAC+
PiFi HIFI DAC+ Digital Audio Card added for better audio quality.
Installation:
Edit /boot/config.txt
Disable the line
#dtparam=audio=on
add
dtoverlay=hifiberry-dacplus
MPD
Currently runs through LiquidSoap, so there is a +- 30 second delay. Ask r3boot ;).
Fixed an issue where MPD hangs on song change. Fix it by uncommenting "device" option in the "audio_output" block (in my case ALSA) in mpd.conf. This is a common error.
Connection through client.
Host: slabpi.dhcp.nurd.space
Port: 6600
It is integrated with Home Assistant view on Jarvis.
HTTPD outputs:
- port 6666 (8000:16:1) used by the VOIP system
- port 7777 (44100:16:2) used by Audiophiles
PulseAudio
The SlabPI is now running PulseAudio, this allows multiple streams to be play simultaneously without having to stop/kill MPD.
Eventually, PulseAudio will be made accessible through the network so everyone can dump their audio to the Slabpi.
Pulseaudio should be accessible over the network, I don't really know yet if it really works though.
Icecast
There is an icecast server running again on port 8050. It's a direct feed from Pulseaudio so all sounds (Entrance themes, speak commands) will be heard on the stream. Perhaps I'll eventually make MPD send to icecast as well for a "clean signal"
Mount point(s):
- /nurds (Pulseaudio)
MPD Control
For those not wanting to install a MPD client, there now runs a small MPD client on port 80 (ypmd) that can be used to directly control MPD.
Youtube
This project now has it's own wiki page, MPDTube
espeak
Espeak is now functional, there were ALSA problems. We Pulseaudio now!
Motion webcam
Running motion for webcam, see this link
Possible resolutions:
- 160x120
- 320x240
- 640x480
Can be checked with:
v4l2-ctl --list-formats-ext
It is included in the Home Assistant view of Jarvis.
Labelprinter implementation
Labelprinter is up and running. See Labelprinter.
Entrance Themes
It has a script running which plays a part of a song for each individual member entering the space. See Entrance themes.
WIP
espeak Nurdbot implementationSeems to work!- Moar cams
- Move logging to mounted location to preserve the micro SD card quality.
- Backups
- Icecast server?
- Scrobble to last.fm?