| Networked Audiomixer | |
|---|---|
 | |
| Participants | User:buzz |
| Skills | Electronics |
| Status | Planning |
| Niche | Electronics |
| Purpose | Infra |
| Tool | No |
| Location | |
| Cost | |
| Tool category | |
Networked Audiomixer Property "Tool Image" (as page type) with input value "File:{{{Picture}}}" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process. {{{Picture}}} {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
What
We've had experience with hardware like this through the Nexia_PM, but thats a very expensive device.
This project aims to make a simple 4x in 1x out (or maybe 2x out) stereo mixer that is controllable over network -only-.
How
Dreamer suggested this circuit ; https://www.cgs.synth.net/modules/cgs33_matrix_mixer_euro.html
This shows a mono 4 to 1 summing mixer, which would be adequate.
Idea will end up with 2x the input (buffer) circuit, and 4x the output (mixing) circuit
Stuff to get
- 16 digital potentiometers , possible model X9C104
- 8 'buffer' opamps , possible NE5532
- 8 output opamps , ??
- ferrite beads , ???
- connectors , ???
- some powersupply? (this circuit needs -15, 0 and +15V) , maybe this meanwell
- passives : 36x 100k ohm , 8x 1k ohm , 4x 220 ohm, 12x 100nF , 8x 47pF, 4x 10uF
- some kinda case?
- some SBC with line-in and network (and storage?) :)