| Arduino Ethernet Relay Box | |
|---|---|
 | |
| Participants | Dennis |
| Skills | Arduino |
| Status | In progress |
| Niche | |
| Purpose | Infra |
| Tool | No |
| Location | Zaal 1 |
| Cost | |
| Tool category | |
Arduino_Ethernet_box.jpg {{#if:No | [[Tool Owner::{{{ProjectParticipants}}} | }} {{#if:No | [[Tool Cost::{{{Cost}}} | }}
What
Parts
- Arduino Ethernet Rev3
- 8 Relay board
This is fitted in a nice project box by Berend and is connected to
- A modded power strip with 5 outlets
The power strip mod
Mod in progress
Closeup of mod in progress
Wiring done
Closeup
Closeup of Wago clips used
Wiring of the relays
Finished
For the mod I took out a piece of metal that connected 1 pin off all 5 outlets. I used 4 Wago clips and some solid core copper wire to connect it all up. Now all 5 sockets can be toggled with relays 4-8.
Purpose
- Use at Maker Faire Eindhoven to toggle some shit via IRC.
- Use at space to have some more lights automated (maybe in Zaal 2 or 3)
Todo for Maker Faire
- Get more lamps
Modify a power strip so that individual outlets can be toggled
Future plans
- Add a (membrane) keypad
- Add another power strip for the other 3 sockets?